4. PROGRAMMING OPERATIONS EO1-11155
4.1 Instructions for Programming
4- 2
4.1 Instructions for Programming
On the MA-600 series adopting the LCD display, each programming operation is performed by selecting the
corresponding menu item on the LCD display.
The keyboard layout is automatically changed in three types according to operation to be performed (ordinary
registration, read/reset, programming) when the Mode Lock is turned to the corresponding position.
Accordingly, in addition to the character code entry method, the character entries in programming operations are
also performed directly through the ordinary type keyboard.
4.1.1 Types of Keyboard Layouts
The keyboard layout is automatically changed in three types when the Mode Lock is turned to the corresponding
position. That for programming operation is used in this chapter.
(1) Keyboard layout for ordinary registration (It is programmed as default setting.)
Mode Lock Position: REG, MGR,
• Ordinary Type Keyboard
LOG
RECEIPT
To Next Page
Loading...
Need help?
General
