TEC MA-600-1 series User Manual

4. PROGRAMMING OPERATIONS EO1-11155
4.11 Department Group Name Programming
4-33
4.11 Department Group Name Programming
In this operation, the name of each Department Group is programmed. Which Departments are linked to each
Group has been set in the DEPARTMENT TABLE PROGRAMMING operation. A maximum of 15 department
groups can be set.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
NOTE: A maximum of 12 one-byte characters or 6 two-byte characters can be entered. A combination of both
types is also available.
OPERATION
CONDITION
[Enter]
[End]
“2 NAMES” is
selected.
Main Menu
“
2 DP GROUP NAME
”
is
selected.
Select a Department Group
to be programmed.
Input a Department
Group Name.
[Enter]
ECR is being outside a sale and in
SET
mode.
Depress
[
↓
]
then
[Enter]
.
Or Depress [2].
The ECR
enters character input mode.
This setting is ended. A long receipt is issued
and the display returns to Main Menu screen.
Depress
[
↓
]
then
[E
nter]
.
O
r
Depress
[2]
.
The Department Group Name is entered and
printed.
A maximum of 12 one
-byte or 6 two-
byte
characters are input.
Select a department group of which name is to
be programmed with the [↑] or [↓] key.

TEC MA-600-1 series Specifications

General

Brand	TEC
Model	MA-600-1 series
Category	Cash Register
Language	English