TEC MA-600-1 series - 4.3 Time Setting or Adjustment

4. PROGRAMMING OPERATIONS EO1-11155
4.3 Time Setting or Adjustment
4-12
4.3 Time Setting or Adjustment
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
NOTE: If an hour value of more than 23 or a minute value of more than 59 is entered, the current data remains
unchanged by setting or adjusting the time.
3) Example
To set time “1:15 p.m. (13:15)”
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
four times.
The cursor is moved on to “5 BASIC”.
Depress the [5] or [Enter] key.
“5 BASIC” is selected.
Depress the [1] or [Enter] key.
“1 TIME” is selected.
(continued on the next page)
OPERATION
CONDITION
“
5 BASIC
”
is selected.
Main Menu
“
1 TIME
”
is selected.
ECR is being outside a sale and in
SET
mode.
Depress
[
↓
]
four times then
[Enter]
.
Or Depress [5].
Depress
[1]
or
[Enter]
.
Input a 4-digit time
value.
4
-
digiti
-
time
value (HHMM) (See
NOTE
below.)
[End]
This setting is ended. A long receipt is issued
and the display returns to Main Menu screen.