9. CASHIER SIGNING OR CASHIER KEY OPERATIONS EO1-11155
9.3 Training Mode Start and End
9- 2
9.3 Training Mode Start and End
When you have newly employed cashiers, you may provide some time for them to train their skills of operating
the ECR. You are to start and end the Training Mode. Once entering the Training Mode, a cashier may operate
just as ordinary sale entry operations in “REG” and “MGR” modes except Sign-ON/OFF entry and check track
operation. The data in the Training Mode are processed into the training cashier memory but not affect any
actual sales data in business.
Outside a sale, and in Cashier Signed-OFF condition for CASHIER CODE ENTRY Method
OPERATION FOR TRAINING MODES START
Cashier Code Entry Method
[LOG/RECEIPT] (or [LOG]) .................................... A training-ON receipt is issued.
2-digit cashier code with Training status (01 to 08)
2-digit cashier’s secret code (01 to 99)
Cashier Key Method
Depress the [CLK] key programmed with Training status .... A training-ON receipt is not issued.
ENTRIES IN TRAINING MODE
Registering operations are allowed by the trainees:
All sale or transaction entry operations are possible in the Training Mode,
except: 1) The drawer will not open.
2) The Consecutive No. on the receipt will not be incremented.
3) Print occurs on receipt but not journal.
4) The Remote Slip Printer prints a slip.
5) When performing a validation print, spaces are printed. (i.e. Printing operation is performed but
nothing is printed.)
OPERATION FOR TRAINING MODE END
Code Entry Method
0 [LOG/RECEIPT] (or [LOG]) .................................... A training-OFF receipt is issued.
Cashier Key Method
Change from the current Cashier Key to another Cashier Key.
Now the ECR is in a Signed-OFF condition. You may turn the Mode Lock to any position for its corresponding
operations. To start sale entries, a Cashier Key to ON status or a cashier’s Sign-ON status is again necessary.
CONDITION
To Next Page
Loading...
Need help?
General
