TEC MA-600-1 series - PLU Preset Price Setting or Changing

4. PROGRAMMING OPERATIONS EO1-11155
4.15 PLU Preset Price Setting or Changing
4-46
4.15 PLU Preset Price Setting or Changing
The preset price of each PLU may be set in the PLU TABLE PROGRAMMING already described. However, the
following operation will be more convenient in setting or changing the price only (not other programmed data).
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
OPERATION
CONDITION
“3 DP/PLU” is
selected.
Main Menu
“
2 PLU
”
is selected.
Input 1st preset price.
ECR is being outside a sale and in
SET
mode.
Depress
[
↓
]
twice then
[Enter]
.
Or Depress [3].
Max. 6 digits (0 to 999999) (
NOTE1
)
Depress
[
↓
]
then
[Enter]
.
Or Depress [2].
The 1st preset price is entered and displayed.
Input a PLU Code
of which
PLU preset price is to be
set or changed.
[PLU]
“
2 UNIT PRICE
”
is
selected.
Depress
[
↓
]
then
[Enter
]
.
Or Depress [2].
Max. 4 digits: 1 to 9999
(
NOTE 3
)
[Enter]
Input 2nd preset price.
Max. 6 digits (0 to 999999) (
NOTE1
)
(C)
-- continued on the next page --
(A)(B)
The 2nd preset price is entered and displayed.
[Enter]