TEC MA-600-1 series - Department Name Programming

4. PROGRAMMING OPERATIONS EO1-11155
4.10 Department Name Programming
4-32
4.10 Department Name Programming
A maximum of 16 characters of department name is programmed here.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
NOTE: A maximum of 16 one-byte characters or 8 two-byte characters can be entered. A combination of
both types is also available.
OPERATION
CONDITION
[Enter]
[End]
“2 NAMES” is
selected.
Main Menu
“1 DP KEY NAME”
is
selected.
Select a department
to be programmed.
Input a Department
Name.
[Enter]
ECR is being outside a sale and in
SET
mode
.
Depress
[
↓
]
then
[Enter]
.
Or Depress [2].
The ECR enters character input mode.
This setting is ended. A long receipt is issued
and the display returns to Main Menu screen.
Dep
ress
[1]
or
[Enter]
key.
The Department Name is entered and the
programmed data is printed.
A maximum of 16 one
-byte or 8 two-
byte
characters are input.
Select a department of which name is to be
programmed with the [↑] or [↓] key.