TEC MA-600-1 series - Page 146

4. PROGRAMMING OPERATIONS EO1-11155
4.8 Cashier Name and Status Programming
4-23
(continued from the previous page)
Operation LCD Display Remarks
The [Enter] key depression allows the
ECR to enter the cashier 1 name input
mode. (The [C] key depression clears
the name already programmed.) The
cashier 1 name is input.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[J] [O] [N] [E] [S] [Enter]
The [Enter] key depression results in
that the input name is entered and
displayed.
The [?] key depression results in that the
following guidance message appears on the
LCD display.
The next [Enter] key depression
allows the ECR to enter the cashier 1
status input mode.
The [?] key depression results in that the
following guidance message appears on the
LCD display.
Select the status of 01 TRAINING with
the [→] key.
The [→] key depression results in that the
status is changed from N to Y.
The [Enter] key depression results in
that the Cashier 1 programming data is
entered.
When the [Enter] key is depressed, the
programmed data is printed.
When the [Rtn] key is depressed after the
[Enter] key, the programming operation for
another cashier can be performed.
The [End] key depression allows the
ECR to end this programming.
A long receipt is issued and the display
returns to Main Menu screen.
10-20-2006 FRI #0
CASHIER
01
#01 JONES
#02 1
8
0028 18:22TM
Number of programmed characters
Number of programmable characters