I Hardware Installation Manual 1. Safety Information
4
5. Before the robot begins operations, make sure that each part is secured in place to prevent any
accidents due to the robot being improperly secured during operation.
6. Before the robot begins operations, always make sure that no personnel or obstacles are within its
range of motion. If the operating environment involves human-machine collaborative work, always
perform the necessary risk assessments before the start of operations.
7. Unauthorized personnel are not allowed to operate this product in order to prevent any possibility of
personal injury or damage to the machine caused by improper operation.
8. Do not install or operate this product in dangerous environments (e.g. in the presence of a strong
magnetic field; dangerous gases; fire, or flammables) to avoid dangers which may occur due to
external conditions during operation.
1. Personnel approaching or operating the robot should check the machine warning lights before
proceeding.
2. After editing the task flow, always start operations in Manual Mode to check that all actions can be
performed correctly during operation before switching the operating mode to Auto.
3. Do not turn off power to the machine while it is in motion unless absolutely necessary.
To Next Page
Loading...
