I Hardware Installation Manual 6. Maintenance and Repair 60
6. Maintenance and Repair
Maintenance of Techman Robot: Clean the exterior of the Techman Robot periodically, and keep the
moving joints clean. The filter of the control box must be cleaned or replaced periodically (determine how
often the filter is cleaned or replaced depending on the cleanliness of surroundings).
Only the legal distributor or authorized service center should repair the Techman Robot. The user should
not repair it himself or herself.
When the robot finishes a job and enters maintenance or servicing status, the user
should record the details of each setting for the job; after repairing and installing it to
the work position, the user must make sure that each setting satisfies the original
conditions before resuming working status, including but not limited to:
- Safety Software Settings
- Safety I/O
- Preset operation project
- TCP Settings
- I/O Settings
- I/O Wiring
To Next Page
Loading...
