Techman Robot TM5 Series - Safety Information; Validation and Liability

I Hardware Installation Manual 1. Safety Information
1
1. Safety Information
1.1 Overview
This chapter describes important safety information about the Techman Robot. The users and system
integrators of the Techman Robot should carefully read and understand this chapter before using this
robot.
1.2 Validation and Liability
The information contained herein neither includes how to design, install, and operate a complete robotic
arm system, nor involves the peripherals which may affect the safety of the complete system. The design
and installation of the complete system must comply with the safety standards and regulations in the
country of use. The integrators of the robot should understand the safety laws and regulations in their
countries and prevent major hazards from occurring in the complete system.
This includes but is not limited to:
 Risk assessment of the whole system;
 Adding other machines and additional safety mechanisms based on the results of the risk
assessment;
 Building appropriate safety mechanisms in the software;
 Ensuring the user will not modify any safety-related measures;
 Ensuring all systems are correctly designed and installed;
 Clearly labeling user instructions;
 Clearly marked symbols for installation of the robot arm and the integrator contact details; and
 Collecting all documents into the technology folder, including the risk assessment, and this
Manual.
1.3 Limitations on Liability
No safety-related information shall be considered a guarantee by Techman Robot that TM5 will not
cause personnel injury or property damage.