Technicolor COM2000 User Manual

w w w . t e c h n i c o l o r . c o m / m c s
Page 81
Figure 60 - QAM6 Command Screen
Below is an explanation of the fields in the lower Control portion of the QAM6 screen shown in
Figure 60:
baseChannel - This field sets the base cable channel number for each of the 3 banks of 4
carriers.
carrierOn - This field allows you to enable or disable individual carriers in the bank of 12.
alternateIp - This field will configure the QAM6 to have a second IP address. This IP address
can be a multicast IP address. However, the QAM6 does not notify a managed switch that it
wants this multicast IP address via IGMP.
tftpIP - This address field sets the address of the file server for SW upgrades.
Base RF channel- Each group
of 4 must be adjacent channels
Sub channel -1, -2…
Port = base + sub
17,18,19…
Bandwidth per
port/subchannel
Total bandwidth per QAM
Total combined bandwidth
Total QAM License count
QAM6 software version
1 activates RF carrier
QAM6 IP
Address:
Chassis 1
QAM1
Alternate IP address
Software upgrade fields

Technicolor COM2000 Specifications

General

Brand	Technicolor
Model	COM2000
Category	Satellite TV System
Language	English