TechniSat DIGITRADIO 2

103
DE
EN
FR
IT
NL
PL
CZ
5.3.4 Using headphones
Hearing impairment!
Do not listen to the radio at high volume with headphones. Doing so can cause
permanent hearing impairment. Turn down the radio volume to the lowest volume
before using headphones.
Only use headphones with a 3.5 mm jack plug.
> Insert the headphone plug into the headphone jack on the rear of the device.
Sound will now only be heard via the headphones, the speaker is switched to
mute.
> If you would like to use the speakers again, unplug the headphones from the
headphone jack on the radio.
If you want to set the maximum volume, shortly before reaching the maximum
possible volume, a message appears [Aention! High volume! OK?]. Confirm
the message by pressing the OK buon. Then you can adjust the volume to the
maximum possible. The seing is saved until you turn the device o/on again.