TechniSat DIGITRADIO 2

112
If no station is detected, check the telescopic antenna and, if required, change
the installation location (Section 5.3.3 / 3.2.1).
7.2.2 Selecting stations
> By pressing the <or > buons, the station list can be called up and you can
switch between the available stations.
Depending on the seing under MENU > Change channel, the OK buon must
then be pressed to play the selected station (alternatively: Channel change >
List) or the station will be played automatically (alternatively: Change channel >
Channel).
7.2.3 Storing DAB+ stations on a memory slot
The programme memory can save up to 20 stations in the DAB+ range.
> First select the desired station (see section 7.2.2).
> In order to store this station on a memory slot, keep the FAV buon pressed
while playing. Then use the <, > buons to select a station memory slot (1 - 20).
Press the OK buon to save.
> Repeat this process to save additional stations.