TechniSat DIGITRADIO 2 - Manual Station Scan; Scan Setting

118
Please use the manual station scan for seing weaker stations.
8.4 Manual station scan
> Briefly press the < or > buons repeatedly to set the desired stations or
frequency.
The display shows the frequency in increments of 0.05 MHz.
8.5 Scan seing
In this menu item it is possible to set the sensitivity of the scan.
> Press the MENU buon and use the < or > buons to select the [Search
seings] item, then press the OK buon.
> Select whether the scan should only stop for stations with a strong signal
[Strong Stations Only] or for all stations (including stations with a weak signal)
[All Stations].
With the All Stations seing the scan stops automatically upon detecting each
available station. This can result in weak stations being played with background
noise.