7.2
FM (VHF) reception with RDS information
RDS is a procedure for transmitting additional information about FM stations.
Broadcasters with RDS transmit their station name or programme type, f o r
e x a m p l e . This is shown on the display. The device can display the RDS
information RT (radio text), PS (station name), PTY (programme type).
7.3
Automatic station search and storage
>
Press the SCAN button (3) to start the automatic station search and to save
the stations found.
The scan starts and scans the entire FM frequency band at your
location. Stations found are stored directly in the favourites memory.
stored in the memory. After the search run, the number of channels found is
shown on the display.
The number of channels found depends on the search setting.
Please refer to point 7.5.
To Next Page
Loading...
Need help?
General