TechniSat DIGITRADIO BT 1 User Manual

47
10.2 Alarm clock
The digital radio has 2 alarm clocks.
When the alarm clock is active, the battery power consumption increases in
standby mode.
You should therefore only use the alarm clock when the digital radio is
connected to the mains. Otherwise, the device may switch off completely
depending on the charge status of the battery, which means that the alarm clock
will no longer work properly and the battery must first be recharged.
> Open the MENU by pressing and holding the MENU/INFO button and select
the [System] entry using the <, > buttons. Press the OK button. Then use
the <, > buttons to select the [Alarm clock] entry.
Press the OK button.

TechniSat DIGITRADIO BT 1 Specifications

General

Brand	TechniSat
Model	DIGITRADIO BT 1
Category	Radio
Language	English