8.3
Hands-free function
If your external device has the so-called HFP Bluetooth protocol (Hands-free
protocol), calls can be received on a paired smartphone on the digital radio.
Accepting an incoming call Press /OK.
Accepted call hang up - Press the/OK
button.
8.4
Revive coupling
To cancel an active pairing, press and hold the SCAN button (3) until [Not
connected] appears on the display. Please note that the device to be decoupled
must be connected to the digital radio if you want to decouple it.
want to decouple. You can then pair a new device as described in section 8.2.
Alternatively, you can also set up the pairing on your external device. Follow the
instructions in the operating instructions for your external device.
To Next Page
Loading...
Need help?
General