TechniSat DIGITRADIO BT 1 User Manual

45
9 AUX input
You can also play back an external device via the analogue AUX input on the digital
radio. Connect the external device to the AUX connection (12) of the DIGITRADIO BT
1 using a 3.5 mm stereo jack cable.
Set the volume of the external device to a high level and then adjust the
volume on the digital radio. If the volume on the external device is too low,
noise may occur during playback.
10 Further functions
10.1 Equaliser
You can use the equaliser to adjust the sound to suit your preferences.
> Open the MENU by pressing and holding the MENU/INFO button and select
the [System] entry using the <, > buttons. Press the OK button. Then use
the <, > buttons to select the [Equaliser] entry. Press the OK button.

TechniSat DIGITRADIO BT 1 Specifications

General

Brand	TechniSat
Model	DIGITRADIO BT 1
Category	Radio
Language	English