RUN PERSONAL: Service & maintenance manual - rev. 3.1
Page 6.30
(3) Check if the receiver has been correctly mounted on the machine, as detail at paragraph: 7.7.
“Disassembling the HS/HR receiver”.
(4) To check for electromagnetic noise near the machine, use Test Box Excite as detailed here
below. You can use one of the following cables ELT-16 (0WC00518AB), CBQ-28
(0WC00390AC) or TRM-28 (0WC00336AC) as connection cable.
TEST BOX
EXCITE
RECEIVER
LED
connecting cable
The circuit lights the LED for each heart beat and/or disturbance received: in this way it is
possible to determine whether there is any interference, and identify its sources.
To Next Page
