TECO A510-2001-H - Page 160

4-106
Function Control mode
Name Screen display V/F
V/F
+
PG
SLV SV
PM
SV
8 Frequency lower limit
Ref. Low Bou
nd
Adjust the lower limit (0 to
100%) of frequency
command based on analog
input, the maximum output
= 100%. The lower limit of
frequency command is the
greater one of the actual
frequency command’s
lower limit 00-13 or the
multi-function analog input.
O O O O O
9 Jump frequency 4 Jump Freq 4
Jump frequency 4.
100% = maximum output
frequency
O O O O O
10 Added to AI1 Add to AI1
Added to AI1.
100% = maximum output
frequency
O O O O O
11 Positive torque limit Positive Tq Limit
100% = motor’s rated
torque
X X O O O
12 Negative torque limit Negative Tq Limit
100% = motor’s rated
torque
X X O O O
13
Regenerative
Torque Limit
Regen. Tq Limit
100% = motor’s rated
torque
X X O O O
14
Positive / negative
torque limit
+/- Tq Limit
100% = motor’s rated
torque
X X O O O
15
Torque command/
Torque limit for
speed control
Tref/Tq Limit
100% = motor’s rated
torque
X X X O O
16
Torque
compensation
Tq Compensation
100% = motor’s rated
torque
X X X O O
17 No function No Function Retain O O O O O