4-213
(2) Counter mode 2
※Note: In this mode, the count value will be greater than 20, which is not similar to
the mode 1 that the count value of mode 1 will be locked to 20.
I3 ON
Counting value reset
Counter setting action value
Input from ladder program
ON/OFF of the C3 input counting pulse is
determined by I1 & i2.
Input from function program
U
Presesn counting
value of the counter
When the counting reaches the setting action
value, then C3=ON. And at the same time, the C3
input of the LADDER program is ON too.
To Next Page
Loading...
