TECO A510-2001-H - Page 269

4-215
Description of the timer mode:
(1) Timer mode 1(ON-delay Timer mode 1)
Example:
(2) Timer mode 2(ON-dealy Timer mode 2)
T= timer setting action value
Reset relay action
Present timing value = 0
Present timing value starts change for timing
Reset relay action
Present timing value = 0
When the set value is reached, the output point (T1 to T8)
Start timing, and relay acts
T = timer setting action value
When I1 = 0, the fifth timer starts timing
Input from LADDER program
Timing unit is 0.1 second Timing mode
1
Input from function program
Timing set value Present timing value
When the timer reaches the set value of 10.0
seconds, T5 is ON
Reset relay action
Present timing value = 0
Current timing value starts change for timing
Reset relay action
Current timing value = 0
Start timing, and relay acts
When the set value is reached, the output point (T1 to T8)
Reset relay action
T = timer setting action value