TECO A510-2001-H - Page 274

4-220
5. Addition and subtraction modes
RESULT（calculation result ）= V1+ V2- V3
Symbol Description
c
calculation result : RESULT
d
Addend V1(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )
e
Addend V2(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )
f
Subtrahend V3(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )
g
Coil output of error signal （M1~MF）
h
Addition and subtraction modes number (AS1~AS4)
6.
Multiplication and division modes
RESULT（calculation result）=V1*V2/V3
Symbol Description
c
calculation result : RESULT
d
Multiplier V1(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )
e
Multiplier V2(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )
f
Divisor V3(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )
g
Coil output of error signal（M1~MF）
h
Multiplication and division modes number (MD1~ MD4)