TECO A510-2001-H - Page 56

4-3
LED dispay
Seven-segment display Description
1. Display the set frequency in idle status.
2. Display the actual output frequency in operation status.
Display parameter code
Display the setting value of parameter
Display
input voltage
Display inverter
current.
Display DC Bus Voltage
Display temperature
Display PID feedback value. The displayed digit is set by 12-01.
Error display, refer to Chapter 5 Troubleshooting and maintenance
Display AI1 / AI2 input (0～100%)
Description of indicator lighting and flashing
Lighting flashing
Manual
identification
Manual
identification
Light of displaying
fault
Lighted on when fault
occurred
FWD Indicating light
FWD
Lighted on in forward
operation status
FWD
It will flash when
it doesn’t operate
under the
forward
command.
REV Indicating light
REV
Lighted on in reversal
operation status
It will flash when
it doesn’t operate
under the
reversal
command.