TECO A510-2001-H - Page 73

4-20
9: AI2 input
10: Torque command
11: q-axis current
12: d-axis current
13: Speed deviation
14: Retain
15: ASR output
16: Retain
17: q-axis voltage
18: d-axis voltage
19: Retain
20: Retain
21: PID input
22: PID output
23: PID target value
24: PID feedback value
25: Output frequency of the soft
starter
26: PG feedback
27: PG compensation volume
04-12
A
O1 gain value 0.0~1000.0 100.0 % O O O O O O *1
04-13
A
O1 bias-voltage value -100.0~100.0 0 % O O O O O O *1
04-14 Retain
04-15 Retain
04-16
A
O2 function setting
Range and definition are the
same as those of 04-11
3 - O O O O O O
04-17
A
O2 gain value 0.0~1000.0 100.0 % O O O O O O *1
04-18
A
O2 bias-voltage value -100.0~100.0 0 % O O O O O O *1