TECO L510 - Page 113

4-79
13-08
Reset Drive to Factory Settings
Range
【1150】: Reset to factory setting. (50Hz,220V/380V system)
【1160】: Reset to factory setting. (60Hz,220V/380V system)
【1250】: Reset to factory setting. (50Hz,230V/400V system)
【1260】: Reset to factory setting. (60Hz,230V/460V system)
【1350】: Reset to factory setting. (50Hz,220V/415V system)
【1360】: Reset to factory setting. (60Hz,230V/400V system)
 When a Parameter lock key number is set parameter 13–07. This lock key code must be entered first before
parameter 13-08 can be set.