3-4
3.3 Mounting on a flat surface
Frame1: Mounting on a flat surface.
Din rail type installation:
Din rail kit includes a plastic and a metal adaptor plate.
Assembly Steps:
1) Attach the metal adaptor plate to the inverter base with the screws provided.
2) Attach the plastic Din rail adaptor to the metal adaptor plate.
3) Push the plastic adaptor forward to lock into position.
Disassembly Steps:
1) Unlock by pushing the snap hooks
2) Retract and remove the plastic Din rail adaptor.
3) Unscrew the metal plate &Remove
Note: JN5-DIN-L01 (Frame 1 Din rail kit part number), including the following parts
Metal plate adaptor, Plastic adaptor, Screw: M3 X 6
To Next Page
Loading...
