TECO L510 - Keypad and Programming Functions; LED Keypad Overview; Keypad Display and Key Functions

4-1
4. Keypad and Programming Functions
4.1 LED Keypad
4.1.1 Keypad Display and Keys
LED Display
Run Key
6 button
Membrane Keypad
Stop Key
Forward Direction
Status Indicator
Reverse Direction
Status Indicator
Frequency
Potentiometer
DISPLAY
Description
5 Digit LED Display
Monitor inverter signals, view / edit parameters, fault / alarm display.
LED INDICATORS
Hz/RPM
LED ON when frequency or line speed is displayed.
FWD
LED ON when inverter is running in forward direction, flashing when stopping.
REV
On when inverter is running in reverse direction, flashing when stopping.
FUN
LED ON when parameters are displayed.
KEYS (6)
Description
RUN
RUN Inverter in Local Mode
STOP / RESET
STOP Inverter
RESET alarms and faults
▲
Parameter navigation Up, Increase parameter or reference value
▼
Parameter navigation down, decrease parameter or reference value
MODE
Switch between available displays
</ENTER
“<” Left Shift: Used to change parameters or values
ENTER: Used to display the preset value of parameters and to save changes