TECO L510S Series - Page 105

4-60
Example 2. Periodic cycle Run.
Mode: 06- 00=【2】or【5】
The inverter will repeat the same cycle periodically.
All other Parameters are set same as Example 1. shown above.
05-01
06-01
06-02
06-03
05-01
06-01
06-02
06-03
06-16 06-17 06-18
06-19
06-16
06-17
06-18
06-19
T
Hz
RUN
Command
RUN
ON
S1 to S5 auto
Run enable
Example 3. Auto_Run Mode for Single Cycle 06-00=【3 or 6】
The speed of final step will be held to run.
Auto Run Mode. 06- 00 =【3】or【6】
Frequency 05- 01 =【15】Hz, 06- 01=【30】Hz, 06- 02=【50】Hz, 06- 07=【20】Hz,
Sequence Run Time 06-16 =【20】s, 06-17=【25】s, 06-18=【30】s, 06-23=【40】s,
Direction 06-32 =【1】FWD 06-33=【1】, 06-34 =【1】, 06-39=【1】,
Unused Sequence Parameters 06-03~06- 06=【0】Hz, 06-19~06-22=【0】s, 06-35~06-38 =【0】
05-01
06-01
06-02
06-16 06-17 06-18 06-23
Hz
06-07
T
RUN
Command
RUN
RUN
S1 to S5 auto
run enable