TECO N3 Series - Page 64

N3 Drive Operations Manual
A (Advanced) Parameter Details; A091 Cont. 61
Hz
t
20s 25s 30s
40s
(A071)
(A072)
(A073) (A074)
(A064)
20Hz
15Hz
30Hz
50Hz
(A063)
(A062)
(A061)
Single Cycle Auto Run Example
Fig. 19.12
(B) Periodic Running - (A091＝0002 and 0005)
In this example the inverter will repeat the same cycle periodically.
Hz
20s 25s 30s
40s
(A071)
(A072)
(A073) (A074)
(A064)
20Hz
15Hz
30Hz
50Hz
(A063)
(A062)
(A061)
Periodic Cycle Auto Run Example
20s
25s 30s
40s
(A071)
(A072)
(A073) (A074)
(A064)
(A063)
(A062)
(A061)
t
Fig. 19.13
(C) Single Cycle (A091 = 0003 and 0006)
In this example the speed of final the step will be held to run.
The settings are the same as the 2 prior examples except A084 which is changed to =1 (Fwd).
Hz
20s 25s 30s
40s
(A071)
(A072)
(A073)
(A074)
(A064)
15Hz
30Hz
50Hz
(A063)
(A062)
(A061)
Single Cycle Auto Run Example; Final step hold
20Hz
Fig. 19.14
Cont.