TECO SPEECON 7200GS - Page 21

20
Fig 9-b LED Digital operator component names and functions
Table 11 Key’s functions
Key Name Function
PRGM
DRIVE
PRGM/DRIVE key
Switches between operation (PRGM) and operation
(DRIVE).
DSPL
DSPL key Display operation status
JOG or L/R key
Enable jog operation from digital operator in operation
(DRIVE).L/R (Local/Remote)key function set by Sn-
05.
FWD
REV
FWD/REV key Select the rotation direction from digital operator.
RESET
RESET key
Set the number of digital for user constant settings.
Also it acts as the reset key when a fault has
occurred.
INCRENMNT key
Select the menu items, groups, functions, and user
constant name, and increment set values.
DECRENENT key
Select the menu items, groups, functions, and user
constant name, and decrement set values.
EDIT
ENTER
EDIT/ENTER key
Select the menu items, groups, functions, and user
constants name, and set values (EDIT). After finishing
the above action, press the key (ENTER).
RUN
RUN key
Start inverter operation in (DRIVE) mode when
operator is used. The led will light.
STOP
STOP key
Stop7200GS/GS510 operation from LCD digital
operator. The key can be enable or disabled by setting
a constant Sn-05 when operating from the control
circuit terminal (in this case, the LED will light).
RUN, STOP indicator lights or blinks to indicate the 3 operating status:
STOP
RUN
STOP
變頻器輸出頻率
亮燈
閃爍
燈熄
RUN
STOP
Inverter output frequency
Frequency Setting
ON
Blink
OFF
JOG
(L/R)