TECO SPEECON 7200GS - Setting User Constant

25
3. SETTING USER CONSTANT
3.1 Frequency command (in Multi-speed operation) A n - □ □
□ □□ □
□ □
Under the DRIVE mode, the user can monitor the parameters and set their values.
Parameter
No.
Name LCD Display (English) Setting Range Setting Unit
Factory
Setting
Ref.
Page
An-01 Frequency Command 1
An-01=000.00Hz
Frequency Command 1
0.00～400.00 Hz
0.01Hz 00.00Hz
2-51
2-52
App-3
An-02 Frequency Command 2
An-02=000.00Hz
Frequency Command 2
0.00～400.00 Hz
0.01Hz 0.00Hz
An-03 Frequency Command 3
An-03=000.00Hz
Frequency Command 3
0.00～400.00 Hz
0.01Hz 0.00Hz
An-04 Frequency Command 4
An-04=000.00Hz
Frequency Command 4
0.00～400.00 Hz
0.01Hz 0.00Hz
An-05 Frequency Command 5
An-05=000.00Hz
Frequency Command 5
0.00～400.00 Hz
0.01Hz 0.00Hz
An-06 Frequency Command 6
An-06=000.00Hz
Frequency Command 6
0.00～400.00 Hz
0.01Hz 0.00Hz
An-07 Frequency Command 7
An-07=000.00Hz
Frequency Command 7
0.00～400.00 Hz
0.01Hz 0.00Hz
An-08 Frequency Command 8
An-08=000.00Hz
Frequency Command 8
0.00～400.00 Hz
0.01Hz 0.00Hz
An-09 Jog Frequency Command
An-09=006.00Hz
Jog Command
0.00～400.00 Hz
0.01Hz 6.00Hz
*1. The displayed "Setting Unit” can be changed through the parameter Cn-20.
*2. At factory setting, the value of "Setting Unit" is 0.01Hz.