Tectrix Climbmax 150 - Troubleshooting Guide; Display Error Code Diagnosis; Performance and Functionality Issues

TROUBLESHOOTING GUIDE
This guide will help to locate a problem in the ClimbAfax. Troubleshooting is much easier with spare parts.
We highly recommend the purchase of a Dealer Service Kit as this guide refers to spare parts in some
sections.
DISPLAY ERRORS
10. CAN'T SLOW DOWN or CONTROL LOST
11. NO SLACK
12. NO BRAKE
13. MEMORY LOST
14. A Numeral Appears in the Interval Display
OTHER PROBLEMS
15. Some LED's (lights) Are Out On The Display And There Is No Beep When The Power Is Turned On
16. All LED's (lights) Are Out On The Display And There Is No Beep When The Power Is Turned On
17. Reset Problem
18. A Key On The Display Console Doesn't Work
19. Pedal Squeak
20. A Pedal Doesn't Return To The Top or A Pedal Won't Go Down
21. Speed Control Is Jerky Or Varies Speed
22. No Speed Control And No Error Message Is Displayed
23. The ClimbAfax Won't Accelerate To Top Speed
24. Cannot Select Group Race
DISPLAY ERRORS
The first thing to do if you get a Display Error is to press CLEAR. Sometimes the errors 'CAN'T SLOW DOWN'
or 'CONTROL LOST' may be displayed in conjunction with other errors such as 'NO BRAKE' or ' NO SLACK.'
If this is the case, follow the 'CAN'T SLOW DOWN' or 'CONTROL LOST' error. The following is a list of things
to check which can cause 'CAN'T SLOW DOWN' or 'CONTROL LOST':
10. 'CAN'T SLOW DOWN' or 'CONTROL LOST'
10.1 Friction Belt
Disconnect the power cord from the Climb Max and remove the cover (see section 25). See if the friction
belt has worn through or is disconnected. If this has happened see section 28, Friction Belt Replacement.
Page 14