115-0917-010 34
Accessories
Add On Bed Extension: 55224
Extend the bed of your Nova DVR SATURN Woodlathe for greater
capacity for turning between centers. Each bed unit adds 510mm
(20in.)
Lathe Stand
(Standard equipment in 55241 and 55243 models)
The stand pieces are cast from a high grade of Cast iron with extremely
good section thickness and CAD generated internal gussets at all critical
points to withstand extremely high stresses with practically no distortion.
Cast iron has always been the material of choice for wood lathe
construction because of its inherent mass and excellent modulus of
vibration dampening. The cast iron stand has been purposely designed to
be heavy, solid and robust keeping this in mind.
Hybrid Stand
The hybrid stand is a combination of cast iron and rectangular hollow
section. Compared to its original predecessor, the hybrid was designed to
be light weight and style.
Small Toolrest: TR100/1
A small 100mm (4in.) toolrest (not shown) for turning small work pieces
or reaching into recessed areas.
Bowl Toolrest:
A curved toolrest, which gives you better chisel support on both the
outside and inside of a bowl. Because of the curve, you are able to
position your chisel support closer to the bowl.
Live Centre System: 5015
A multi-function live center system to expand your options when turning
between centers. It includes quick change tapers: a hollow cup center
point, threaded center, cone center, and an extension center. Made with
three bearings and precision machined for a high-quality finish.
Handwheel Unit: LHB
The handwheel is mounted on the outboard end of the headstock
spindle so you can manually position work or to slow it down. The
vacuum coupler can also be added to this unit to make a vacuum
holding option.
To Next Page
Loading...
