Tektronix Keithley 2260B Series - Page 164

2260B Series User Manual
160
6. Use the current knob to set the
Password for the F-00 setting. The
Password is “5 0 0 4”.
Current
7. Press the Voltage knob to enter the
Special Mode. SF- 1 will be
displayed when successful.
Voltage
X can be anything in the display
8. Rotate the voltage knob to change
the SF setting to SF- 2.
Voltage
9. The display will show SF- 2
on the top.
10. Use the current knob to set SF- 2 to
“1”.
Current
11. Press the Voltage knob to copy the
new firmware to the 2260B.
Voltage