Tektronix Keithley 2260B Series - Set Up

2260B Series User Manual
40
Set Up
Line Voltage Connection – 1080W Models
Background
The 1080W (2260B-30-108/80-40/ 250-13/800-4)
models use a universal power input that can be
used with 100 and 200 VAC systems. To
connect or replace the power cord, use the
procedure below:
Warning
The following procedure should only be attempted
by competent persons.
Ensure the AC power cord is not connected to
power.
Removal
1. Turn off the power switch.
1
2. Unscrew the power cord
protective sheath.
3. Remove the 2 screws
holding the power cord
cover and remove.
3
2