Tektronix Keithley 2260B Series - Page 45

OPERATION
41
4. Slide the cover off the AC
terminals.
5. Remove the AC power
cord wires.
5
4
Installation
1. Connect the AC power
cord wires to the AC input
terminals.
 White/Blue  Neutral (N)
 Green/Green-
yellowGND ( )
 Black/Brown  Line (L)
LN
Line
Neutral
Ground
2. Set the cover back over the
AC terminals.
2
3. Re-install the power cord
cover.
4. Screw the power cord
sheath back onto the cover.
3
4