Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Examples
TRIGGER:A:BUS
:B1:FLEXRAY:FRAMEID:HIVALUE “11001100101”
sets the
frame ID high value to 11001100101.
TRIGGER:A:BU
S:B1:FLEXRAY:FRAMEID:HIVALUE?
might return
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:HIVAL UE "XXXXXXXXXXX"
indicating the frame ID high value is “don't care”.
TRIGger:A:
BUS:B<x>:FLEXray:FRAMEID:QUALifier
This command specifies the qualifier to use when triggering on the FlexRay
bus frame ID field. The trigger condition needs to be set to IDentifier (using
TRIGger:
A:BUS:B<x>:FLEXray:CONDition).
B<x>
Conditions
This command requires a DPO4AUTOMAX application module for
DPO/MSO4000B and MDO4000/B/C models or MDO3FLEX application module
for MDO3000 models.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUA Lifier
{LESSthan|MOREthan|EQual|UNEQual|LESSE Qual|MOREEQual|
INrange|OUTrange}
TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUA Lifier?
Arguments
LESSthan sets the frame ID qualifier to less than.
MOREthan sets the frame ID qualifier to greater than.
EQual sets the frame ID qualifier to equal.
UNEQual sets the frame ID qualifier to not equal.
LESSEQual sets the frame ID qualifier to less than or equal.
MOREEQual sets the frame ID qualifier to greater than or equal.
INrange sets the frame ID qualifier to in range.
OUTrange sets the frame ID qualifier to out of range.
Examples
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:QUALI FIER LESSTHAN sets the
frame ID qualifier to less than.
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:QUALI FIER? might return
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:QUALI FIER EQUAL indicating the
frame ID qualifier is set to equal.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-817

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English