Front--Panel Buttons and Indicators
2
SPG600 & SPG300 Sync Pulse G enerators Quick Reference Manual
Use this button to access the System menu. The System menu lets you set
system related parameters, such as output configuration and network parameters.
Use these buttons to control the menu display.
Arrow Buttons. Use the arrow buttons to scroll through the available menu items.
ENTER Button. Use the ENTER button to enable the selected menu item.
CANCEL Button. Use the CANC EL button to disable the selected menu item and
return to the previous menu item.
Use this button to enable or disable the front-panel buttons. When pressing this
button for about one second while the front-panel buttons are enabled, all of the
front-panel buttons are disabled. If you have selected a timeout period in the
FRONT PANEL DISABLE item in the System menu, and that period passes
without a button push, all of the front-panel buttons are also disabled.
Press and hold this button for about three seconds to enable the front-panel
buttons. The timeout counter is restarted (if the timeout period is already set) and
turns the indicator next to the button lights to show that the front-panel is
enabled.
You can set the timeout period using the System menu.
The reference indicators indicate whether the sync pulse generator is locked to its
internal oscillator or an external reference signal.
INT.REF. This indicator lights when the sync pulse generator is using its internal
reference oscillator.
EXT.REF. This indicator lights when the sync pulse generator is locked to an
external reference signal. A blinking indicator means that the sync pulse
generator is using the external reference signal but is unable to lock to the signal.
SYSTEM Button
Menu Control But tons
PANEL ENABLE button
Reference Indicator
To Next Page
Loading...
Need help?
General
