Tektronix SPG3UP 01 Quick Reference Manual

SPG600 & SPG300 Sync Pulse G enerators Quick Reference Manual
3
Rear-Panel Connectors
This section describes the sync pulse generator rear-panel connectors.
Power connector
100 BASE-T
GPI
Serial digital outputs
(Option 03)
Word clock output
Analog outputs
(Option 02)
REF connectorsSerial digital
outputs
Analog outputsAES/EBU Serial
digital audio outputs
AES/EBU serial digital
or analog audio outputs
(XLR connector)
Figure 3: SPG600 rear panel (Option 0203)
Power connector
100 BASE-T
GPI
Analog outputs
(Option 02)
REF connectorsAES/EBU serial digital
or analog audio outputs
(XLR connector)
Word clock output
Serial digital outputs
Figure 4: SPG300 rear panel
The sync pulse genera tor is designed to operate fr om a single-pha se power source
with the neutra l conductor at or near ea rth ground. Only the line conductor is fused
for over-curr ent protec tion. A protec tive ground connection through the grounding
conductor in the power cord is essentia l for safe opera tion.
WARNING. To avoid dangerous electric shock, do not connect power to the
instrument when the top cover is off. Dangerous potentials are present on the
Power circuit board.
Power Connect or

Tektronix SPG3UP 01 Specifications

General

Brand	Tektronix
Model	SPG3UP 01
Category	Pulse Generator
Language	English