Tektronix TDS210 - Page 144

Command Descriptions
2- 124
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
HARmonics?
Might return :HARMONICS:ENABLE ON;SETUP AUTOMATIC;SHOW
ALL;SELECT 1;SOURCE CH1, indicating that the oscilloscope is
acquiring and showing all harmonics and measuring the first
harmonic from channel 1.
HARmonics:ENABle
(TPS2000 Series with TPS2PWR1 Power Analysis Module Only)
Turns the harm onics measurement on or off.
Power Measurement
HARmonics:ENABle { ON | OFF }
HARmonics:ENABle?
ON causes the oscilloscope to display the harmonics menu and turn
on Harmonics analysis.
OFF causes the oscilloscope to display the CH1 menu.
HARmonics:ENABLe ON
Causes the oscilloscope to display the harmonics menu.
HARmonics:ENABLe?
Might return OFF, indicating that the harmonics menu is turned off.
HARmonics:FREquency? (Query Only)
(TPS2000 Series with TPS2PWR1 Power Analysis Module Only)
Returns the frequency of the select ed harmonic.
Examples
Group
Syntax
Arguments
Examples