Command Descriptions
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
2- 133
HEADer
Sets and queries the Response Header Enable State that causes the
oscilloscope to either include or omit headers on query responses.
This command does not affect IEEE Std 488.2–1987 Common
Commands (those starting with an asterisk); they never return
headers.
Miscellaneous
HEADer { <NR1> | OFF | ON }
HEADer?
ON or <NR1> ≠ 0 set s the Response Hea der Enable State to true. This
causes the oscilloscope to include headers on applicable query
responses. You can then use the query response as a command.
OFF or <NR1> = 0 sets t he Re sponse Header Enabl e State to false.
This causes the oscilloscope to omit headers on query responses so
that only the argument is returned.
HEADer OFF
Causes the oscilloscope to omit headers from query responses.
HEADer?
Might return 1, showing that the Response Header Enable State is
true.
VERBose
Group
Syntax
Arguments
Examples
Related Commands
To Next Page
Loading...
