Tektronix TDS210 - HORizontal? (Query Only)

Command Descriptions
2- 134
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
HORizontal? (Query Only)
Returns all settings for the horizontal commands. The commands
HORizontal:MAIn:SCAle, HORizontal:MAIn:SECdiv, HORizon-
tal:SCAle, and HORizontal:SECdiv are equivalent, so HORizon-
tal:MAIn:SCAle is the value that is returned.
The commands HORizontal:MAIn:POSition and HORizontal:POSi-
tion are equivalent, so HORizontal:MAIn:POSition is the value that
is returned.
Horizontal
HORizontal?
Returns all horizontal settings
HORizontal?
Might return the following string:
:HORIZONTAL:VIEW MAIN;RECORDLENGTH 2500;MAIN:POSITION
0.0E0;SCALE 5.0E–4;HORIZONTAL:DELAY:POSITION 0.0E0;SCALE
2.5E–4
HORizontal:DELay? (Query Only)
Returns all settings for the window time base. The commands
HORizontal:DELay:SECdiv and HORizontal:DELay:SCAle are
equivalent, so only the values for HORizontal:DELay:SCAle are
returned.
Horizontal
Group
Syntax
Returns
Examples
Group