Command Descriptions
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
2- 135
HORizontal:DELay?
All settings for the window time base
HORizontal:DELay?
Might return :HORIZONTAL:DELAY:POSITION 0.0E0;
SCALE 5.0E–4
HORizontal:DELay:POSition
Sets or queries the window time base horizontal position. This
command is equivalent to adjusting the Horizontal Position when
Window Zone or Window is selected from the Horizontal menu.
Horizontal
HORizontal:DELay:POSition <NR3>
HORizontal:DELay:POSition?
<NR3> is the position in seconds. This value is the difference between
the trigger point and the center graticule. Positive values place the
trigger before the center graticule.
HORizontal:DELay:POSition 2.0E–6
Sets the window position to 2 s before the cent er graticule.
HORizontal:DELay:POSition?
Might return –1.0E–3, indicating that the window position is 1 ms
after the center graticule.
Syntax
Returns
Examples
Group
Syntax
Arguments
Examples
To Next Page
Loading...
