Command Descriptions
2- 144
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
Returns the oscilloscope identification in the following format for
TDS2MEM modules:
TEKTRONIX, <model number>,CF:91.1CT TDS2MEM:FV:v<module
firmware version number>
Returns the oscilloscope identification in the following format for
TPS2000 oscilloscopes:
TEKTRONIX,<model number>,CF:91.1CT FV:v<oscilloscope
firmware version number> TPS2XXXV:v<module firmware
version number>
Returns the oscilloscope identification in the following format for
TDS1000B and TDS2000B oscilloscopes:
TEKTRONIX/<model number>,<serial number>, CF:91.1CT
FV:v<oscilloscope firmware version number>
*IDN?
Might return the following response with a TDS2CMA installed:
ID TEKTRONIX,TDS 220,0,CF:91.1CT FV:v2.12 TDS2CM:CMV:
v1.04
Might return the following response with a TDS2MEM installed:
ID TEKTRONIX,TDS 2022,0,CF:91.1CT TDS2MEM:FV:v6.00
Might return the following response for a TPS2012 oscilloscope with
a TPS2PWR1 power a nalysis module installed:
TEKTRONIX,TPS 2012,0,CF:91.1CT FV:v9.48 TPS2PWR1:v1.00
Might return the following response for a TPS2022B oscilloscope
with the serial number CU10100:
TEKTRONIX,TDS 2022B,CU10100,CF:91.1CT FV:v20.22
Might return the following response for a TDS1012B oscilloscope
with the serial numbe CU010114:
TEKTRONIX,TDS 1012B,CU010114,CF:91.1CT FV:v21.21
Examples
To Next Page
Loading...
