Command Descriptions
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
2- 143
Might return the following response with a TPS2PWR installed:
ID TEK/TPS 2012,CF:91.1CT FV:v9.48 TPS2PWR1:v1.00
Might return the following response for a TDS1012B oscilloscope:
ID TEK/TDS 1012B,CF:91.1CT FV:v21.21
*IDN?
*IDN? (Query Only)
Returns the oscilloscope identification code in IEEE 488.2 notation.
NOTE. *IDN? must be the last command when part of a concatenated
statement. Otherwise the oscilloscope generates event message 440.
The *IDN? and ID? responses are slightly different.
Status and Events
*IDN?
Returns the oscilloscope identification in the following format for
TDS2CM, TDS2CMA, and TDS2MM modules:
TEKTRONIX, <model number>,CF:91.1CT FV:v<oscilloscope
firmware version number>,TDS2XX:XXV:v<module firmware
version number>
Where XX is the module type CM (TDS2CM or TDS2CMA
communications module) or MM (measurement module).
Related Commands
Group
Syntax
Returns
To Next Page
Loading...
