Tektronix TDS210 - Page 162

Command Descriptions
2- 142
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
Status and Events
ID?
Returns the oscilloscope identification in the following format for
TDS2CM, TDS2CMA, and TDS2MM modules:
ID TEK/<model number>,CF:91.1CT,FV:v<oscilloscope
firmware version number>,TDS2XX:XXV:v<module firmware
version number>
Where XX is the module type, CM (TDS2CM or TDS2CMA
communications module) or MM (measurement module).
Returns the oscilloscope identification in the following format for
TDS2MEM modules:
ID TEK/<model number>,CF:91.1CT TDS2MEM:FV:v<module
firmware version number>
Returns the oscilloscope identification in the following format for
TPS2000 oscilloscopes:
ID TEK/<model number>,CF:91.1CT FV:v<oscilloscope
firmware version number> TPS2XXXV:v<module firmware
version number>
Returns the oscilloscope identification in the following format for
TDS1000B and TDS2000B oscilloscopes:
ID TEK/<model number>,CF:91.1CT FV:v<oscilloscope
firmware version number>
ID?
Might return the following response with a TDS2CMA installed:
ID TEK/TDS 220,CF:91.1CT,FV:v1.00 TDS2CM:CMV:v1.00
Might return the following response with a TDS2MEM installed:
ID TEK/TDS 2022,CF:91.1CT TDS2MEM:FV:v6.00
Group
Syntax
Returns
Examples