Command Descriptions
2-56
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
Miscellaneous
AUTOSet:SIGNAL?
Might return { LEVEL | SINE | SQUARE | VIDPAL | VIDNTSC |
OTHER | NONe }
LEVEL if the oscilloscope discovered a DC level.
SINE if the oscilloscope discovered a sine-like waveform.
SQUARE if the oscilloscope discovered a square-like waveform.
VIDPAL if the oscilloscope discovered a PAL or SECAM standard
video signal.
VIDNTSC if the oscilloscope discovered an NTSC standard video
signal.
OTHER if the oscilloscope was unable to classify the signal.
NONE if the AUTOSET menu is not di splayed.
AUTOSet:VIEW
(TDS1000, TDS2000, TDS1000B, TDS2000B, and TPS2000 Series
Only)
If the current menu is not the Autoset me nu, or if the view is not
valid for the detected waveform, the set command causes the
oscilloscope to generate error 221 (Settings conflict).
Miscellaneous
AUTOSet:VIEW { MULTICYcle | SINGLECYcle | FFT |
RISINGedge | FALLINGedge | FIELD | ODD | EVEN | LINE |
LINENum | DCLIne | DEFault | NONE }
Group
Syntax
Returns
Group
Syntax
To Next Page
Loading...
Need help?
General
