Command Descriptions
2- 108
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
DISplay:PICture:AUTOContrast
(Requires TDS3VID or TDS3SDI)
Sets or returns the video picture mode autocontrast setting.
Display
DISplay:PICture:AUTOContrast { OFF | ON | <NR1> }
DISplay:PICture:AUTOContrast?
<OFF> or <NR1> = 0 disables picture autocontrast mode.
<ON> or <NR1> ¸ 0 enables picture autocontrast mode.
DISPLAY:PICTURE:AUTOCONTRAST?
might return DISPLAY:PICTURE:AUTOCONTRAST ON, indicating that the video
picture autocontrast mode is enabled.
DISplay:PICture:BRIghtness, DISplay:PICture:CONTRAst,
DISplay:PICture:STATE
DISplay:PICture:BRIghtness
(Requires TDS3VID or TDS3SDI)
Sets or returns the video picture mode brightness setting.
Display
DISplay:PICture:BRIghtness <NR1>
DISplay:PICture:BRIghtness?
<NR1> sets the picture brightness value from 0 to 100. DISplay:PICture:AUTO-
Contrast must be OFF in order to set the brightness value.
DISPLAY:PICTURE:BRIGHTNESS?
might return DISPLAY:PICTURE:BRIGHTNESS 34, indicating that the video
picture brightness setting is 34.
Group
Syntax
Arguments
Examples
Related Commands
Group
Syntax
Arguments
Examples
To Next Page
Loading...
