Tektronix TDS3000 Series - Page 198

Command Descriptions
2- 160
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
LIMit:TEMPLate:DESTination
(Requires TDS3LIM)
Sets or returns the destination reference waveform that the LIMit:TEMPLate
STORe command will use.
Limit Test
LIMit:TEMPLate:DESTination REF<x>
LIMit:TEMPLate:DESTination?
REF<x> specifies the reference waveform destination in which the template
waveform is to be stored.
LIMIT:TEMPLATE:DESTINATION REF2
specifies that the template waveform referred to with the LIMit:TEMPLate
STORe command is stored as the REF2 waveform.
LIMit:COMPARE:CH<x>, LIMit:TEMPLate, LIMit:TEMPLate:SOUrce
LIMit:TEMPLate:SOUrce
(Requires TDS3LIM)
Sets or returns the source channel, or reference waveform that LIMit:TEMPLate
STORe will use in deriving the limit test template waveform.
Limit Test
LIMit:TEMPLate:SOUrce { CH<x> | REF<x> }
LIMit:TEMPLate:SOUrce?
CH<x> specifies that the template waveform source is the waveform currently
being acquired using the specified channel.
REF<x> specifies that the template waveform source is the waveform currently
stored as the specified reference waveform.
Group
Syntax
Arguments
Examples
Related Commands
Group
Syntax
Arguments